The roof replacement process is time-consuming but necessary as every roof expires eventually. When it’s time to replace your roof, it’s essential to understand the process.

Roof replacement isn’t a repair that should be delayed. When you sense that your roof is nearing the end of its useful life, brush up on these basics to learn more about the replacement process.

Even if you’re hiring a professional roofing contractor to conduct the work, it’s still useful to know what they will be doing throughout the process so you know what to expect.

Here’s the roof replacement process explained.

Removing the Old Roof

The first of the roof replacement steps are removing the old roof. Before your roof replacement company can install a new roof, contractors generally have to remove the old one.

If the roof has shingles, the tiles are pried loose with a tool called a shingle fork. If you have a metal roof, it’s removed panel by panel with a full-size pry bar, or a drill if the screws aren’t too worn.

Installing the New Roof

After the roof replacement preparation, your contractor will begin to install the new roof. This process differs depending on the type of roof you choose.

There are many roof replacement options available. You may make your choice depending on roof replacement cost, durability, appearance, fire resistance, roof suitability, and other factors. Some people also prefer to have their homes blend in with other houses on their street.

Types of Roofing Material

There are lots of roofing materials available to choose from. As you may expect, each option requires a different process of installation. Here are two examples.

Replacing a Metal Roof

When installing a metal roof, contractors must be careful to fit everything square and then begin bolting the new roof down by going up the vertical edge. The term square, when used in the roofing industry, is a unit of area. One square is equivalent to 100 square feet.

Workers will apply the screws into the ridges, but never the flats.

As a result, the roof will install flatter, and the screws will be safe from pooling water. This process also helps to keep fasteners away from any water. Opt for screws featuring rubber washers for the best results.

Replacing a Shingle Roof

Workers replacing roof shingles will install starter shingles at the bottom and sides of the roof. The nails fit in just under the tar strips found on the shingles. Staggered rows shield against leaks.

Shingles arrive in bundles. Three or four bundles of shingles usually will cover a square of roofing area.

Understanding the Roof Replacement Process

We’re just covering the roof replacement process, and there’s a lot more to learn. Here at Western Skies Exteriors, we’re more than happy to answer all your questions about a potential roof replacement. Check out our reviews and references on our website, receive a quote on a roof replacement job, or browse our available services.

We guarantee a skilled, professional, and safe job at an affordable price.

Western Skies | Greenwood Village Colorado

Western Skies | Greenwood Village Colorado